AMCC 3ware 9650SE-2LP Podręcznik Użytkownika Pobierz pdf (Strona 213)

100

101

Updating the Firmware and Driver

www.3ware.com 201

To compile the driver as a module

1 Boot to FreeBSD.

2 Download and extract the driver, as described under “Downloading the

Driver and Firmware” on page 181.

3Unpack

twa.tgz. Then copy the *.c and *.h files to

/sys/dev/twa and the Makefile to /sys/modules/twa.

4 Build the

twa.ko module

cd /sys/modules/twa

make

The twa.ko module is created in /sys/modules/twa

To load the driver as a module

1 In the current configuration file under /usr/src/sys/i386/conf or

/usr/src/sys/amd64/conf comment out the entry: "Device twa #

3ware 9000 series

". This will unlink the old driver once you rebuild

the kernel.

2 Rebuild the kernel.

Run command

config <config_name> specifying your configuration

file: (GENERIC, SMP, PAE, or your custom config), followed by:

cd ../compile/<config_name>

make clean

make cleandepend

make depend

make

make install

3 Reboot to FreeBSD.

4 Load the kernel driver module from

/sys/modules/twa

cd /sys/modules/twa

kldload ./twa.ko

5 If you wish to load the driver automatically every time the system is

rebooted,

add the line 'twa_load="YES"' to the file

/boot/loader.conf

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 360 361

Komentarze do niniejszej Instrukcji

Brak uwag

AMCC 3ware 9650SE-2LP Podręcznik Użytkownika Strona 213

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Kontrolery RAID AMCC 3ware 9650SE-2LP